Check For Messages; Time Saver - BT SYNERGY 3505 User Manual

5675 BT Synergy 3505 UG [4]
3. Press within eight seconds. You will hear "Answer on".
7
If you have any new messages, they will be played after
you have entered your security code.

Check for messages

1. Dial your phone number. When you hear your outgoing
message, press
You will hear "Please enter your security code".
2. Enter your 3-digit code. If you have new messages, you
will hear "You have (n) new messages", and they are
played.
Or you will hear "You have no new messages, to hear main
menu, press 1."

Time saver

If you have set the answer delay to Time Saver, your
answering machine will answer after 2 rings if you have
new messages. If you do not have new messages it will
not answer until 6 rings. This enables you to hang up
before you are connected, saving you the cost of a call.
11/11/03 4:15 PM
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
.
Page 51
Remote access
If you enter your security code
incorrectly, after the second
attempt, your BT Synergy 3505
will announce: "Thank you for
calling" and will hang up.
When you first dial in you will be
prompted for the security code.
If the code is not entered within
10 seconds you will be prompted
again, if no code is entered within
10 seconds then your BT Synergy
3505 will hang up.
51