To Check For Messages; Time Saver - BT FREELANCE XD500 User Manual

Press the
8 seconds. You will hear
"Answer On" and your
answering machine will
now be switched on to
answer incoming calls.
If you have new messages they
will be played after you have
entered your security code.

To check for messages

Dial your phone number
and wait.
When you hear your
outgoing message, press
✱
the button on your
phone. You will hear, "Please
enter your security code".
Enter your security code.
If you have new messages,
you will hear, "You have 'n'
new messages".
Your messages will be
played.
If you have no new
messages, you will hear,
"You have no new messages,
to hear main menu press 1".
button within
You have 15 seconds to
enter any other instructions
before your Freelance XD
500 hangs up.
If you enter your security PIN
code incorrectly, after the
second attempt, your Freelance
XD 500 will announce: "Thank
you for calling" and will then
hang up.

Time saver

The Time saver feature is useful if
you are out and want to ring in and
check if you have received any new
messages.
If your answering machine is set to
time saver you can check whether
you have new messages or not
before your answering machine
actually answers your call. If you
have new messages your answering
machine will answer after 2 rings,
if you do not have any new
messages, it will not answer until
6 rings. This enables you to hang
up before you are connected, saving
you time and the cost of a call.