Additional Handsets And Bases; Register Handset To Base - BT SYNERGY 3505 User Manual

5675 BT Synergy 3505 UG [4]
Additional handsets & bases
53
Up to 5 handsets can be registered and operated from
any one BT Synergy 3505 base.
With additional handsets, you can make internal calls
between two handsets while a third is making an
external call.
Each handset can be registered on up to 4 bases.

Register handset to base

Make sure the handset is close to the base.
At the base:
1. Press and hold
about 10 seconds) then release.
At the handset:
1. Press then scroll
11/11/03
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
until you hear two beeps (after
Page
to REGISTER and press
4:16 PM Page 53
IMPORTANT
Each additional handset you buy
must be registered with the base.
Remember to charge the batteries
of new handsets for at least 16
hours before use. If the display
shows NOT REG, and
your handset is not yet registered
with the base.
Your handset is supplied pre-
registered as Handset 1 to its base
(Base 1).
If you have purchased a multiple
pack, the additional handset will be
supplied as Handset 2 etc. All will
be registered to Base 1.
.
Section 53
is flashing,