Answer Delay - BT SYNERGY 3505 User Manual

5675 BT Synergy 3505 UG [4]
3. Press to delete it. The pre-recorded outgoing
5
message is played back and reinstated.
4. Press and hold

Answer delay

Answer delay sets the number of times your BT Synergy
3505 will ring before the answering machine picks up a
call. The default setting is 6 rings. You can change this
setting to 2-9 rings or time saver.
At the base:
1. Press and hold
announced, then release.
2. Press to scroll through the options, which are
announced with each press.
When you hear the setting you want, do not press any
button. The setting is announced again as confirmation.
Check answer delay setting
At the base:
1. Press and release
and displayed.
11/11/03 4:15 PM
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
to return to standby.
until the current setting is
. The current setting is announced
Page 43
Using the answering machine
Why time saver?
Time Saver can save you the cost
of a call when you want to ring in
to find out if you have new
messages.
If your answering machine answers
after 2 rings, you have new
messages. If you have no new
messages it will answer after 6 rings.
So if you hear a third ring, you can
hang up before you are connected,
saving you the cost of a call.
43