BT SYNERGY 3505 User Manual page 61

5675 BT Synergy 3505 UG [4]
Problems
You cannot link up
with the base station
No ring on the handset
Buzzing noise on my
radio, TV, computer
or hearing aid
The handset is not
charging properly
11/11/03 4:21 PM
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
Possible cause
Is flashing in the display? You may be out of
range, move closer to the base.
Check that the base is connected to the mains power
and switched on.
Are the batteries low or flat? If so, charge the batteries
or replace them if necessary.
If using more than one base, check that you are
connected to the correct base. See page 29.
Check that the ringer volume is switched on, see page 24.
Check that the base is plugged into the phone socket
and that it is also connected to the mains power and
switched on.
Sometimes, your BT Synergy 3505 and other DECT GAP
compatible handsets can interfere with other electrical
equipment if placed too close. Try moving at least one
metre away from such appliances.
Check that the base is plugged into the mains socket
and switched on.
Page 61
Help 61