Variable Loading Floor In The Luggage Compartment - Skoda Yeti Owner's Manual

›
First of all insert the cross rod into the mount
it forward. In the same way, insert the cross rod into the mount
side of the vehicle.
›
Hang the carabines at the ends of the strap into the lashing eyes behind the
C
rear seats.
›
Pull the belts through the tensioning clasp.
Removing the net partition
›
Undo the belts on both sides and unhook the carabines
›
Push the cross rod first of all on the one side and then on the other side to-
wards the rear.
›
Remove the cross rod from the mounts
Packing the net partition
›
Press the red button of the joint
›
Put the separation net folded together in the bag and close it.
›
Attach the bag with the aid of the plastic carabines to the eyes on the left and
right luggage compartment trim panel.
Installing and removing the net partition behind the rear seats is carried out anal-
ogously as behind the rear seats. Use the lower fixing eyes on the carrier rails in
order to attach the carabines. To enlarge the luggage compartment, the rear
seats can be removed.
Installing and removing the net partition behind the rear seats with variable load-
ing floor » page 72 is carried out analogously as behind the rear seats without
variable loading floor. Use the lower fixing eyes on the carrier rails in order to at-
tach the carabines.
The opening » Fig. 59 in the net partition is designed to feed through the
D
three-point seat belt » page 140.

Variable loading floor in the luggage compartment

Introductory information
The variable loading floor makes it easier to handle bulky goods and creates an
even luggage compartment floor when the rear seat backrests are folded for-
ward.
CAUTION
The maximum permissible load of the variable loading floor is 75 kg.
72
Using the system
» Fig. 59 on one side and push
B
on the other
B
» Fig. 59.
C
.
B
» Fig. 59- the joint becomes loose.
A
Note
The room under the variable loading floor can be used to stow objects.
■
If the variable loading floor is installed, no flexible storage compartment can be
■
installed.
Remove variable loading floor
Fig. 60 Luggage compartment: Fold up variable loading floor/remove
Remove variable loading floor
›
Fold up the loading floor by moving it in the direction of the arrow
›
Fold up the variable loading floor in direction of arrow
›
Pull on both sides of the locking levers in direction of arrow
›
Remove the variable loading floor in direction of arrow
›
The variable loading floor is installed in the reverse order.

Secure the variable loading floor in the raised position
›
Fold up the hooks on the fastening strip in direction of arrow
›
Fold up the variable loading floor behind the rear back backrests.
›
Fold down the hooks in direction of arrow
›
Support the variable loading floor on the hooks folded downwards.
» Fig. 60.
1
.
2
.
3
.
4
» Fig. 56.
1
as far as the stop.
3

