Skoda Yeti Owner's Manual page 63

WARNING (Continued)
If the front passenger seat backrest is folded, passengers may only be con-
■
veyed on the outer seat behind the driver.
Never transport objects on the seat backrest which was folded forwards,
■
which:
impair driver visibility;
■
make it impossible for the driver to control the vehicle, e.g. if they are
■
placed under the pedals, or could protrude into the driver's zone;
could lead to injury to passengers due to a change of direction or braking
■
manouvre when accelerating sharply.
Adjusting front seats electrically
Fig. 43 Side view: Control elements for seat adjustment/switches for seat
adjustment
ä
First read and observe the introductory information and safety warn-
ings on page 60.
Adopt the correct seated position before setting
Adjusting a seat in a forward/back direction
›
Press the switch » Fig. 43 forwards or backwards in the direction of arrow 1.
B
Set the height of the seat cushion
›
Press the switch upwards or downwards.
B
Adjust the angle of the seat cushion
›
Press the switch in the direction of arrow 2 or 3.
B
62
Using the system

» page 60.
Adjusting the seat backrest
›
Press the switch in the direction of the desired setting.
C
Reducing or increasing the curvature of the lumbar support
›
Press the switch forwards or backwards.
A
Raising or lowering the curvature of the lumbar support
›
Press the switch upwards or downwards.
A
Note
If the movement of the seat is inadvertently interrupted during an adjustment,
once again press the switch in the appropriate direction and complete the adjust-
ment of the seat.
Storing setting
ä
First read and observe the introductory information and safety warn-
ings on page 60.
The memory function for the driver's seat provides the option to store the individ-
ual positions of the driver's seat and the external mirrors. A setting position can
be allocated to each of the three memory buttons
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat » page 62.
›
Adjust both of the exterior mirrors
›
Press the button » Fig. 44.
A
SET
›
Press one of the memory buttons
ton - an acknowledgement signal confirms that the seat setting is stored.
SET
Fig. 44
Memory buttons and SET button
» Fig. 44, i.e. three in total.
B
» page 58.
within 10 seconds after pressing the but-
B

£