Removing The Burner; Removing The Detection Electrode; Removing The Ignition Electrode - Ariston C Operating Instructions Manual

18.2.2 Removing the burner

1. Carry out step 18.1.1 and 18.2.1;
2. Remove the 3 screws F from the
air/gas manifold (Fig. 60);
F

18.2.3 Removing the detection electrode

1. Carry out step 18.1.1;
2. Remove the 2 screws G from the
electrode manifold (Fig. 63);
G

18.2.4 Removing the ignition electrode

1. Carry out step 18.1.1;
2. Remove the earth cable from the
electrode (Fig. 66);
48
3. Slide the burner out from the
front, taking care not to damage
the insulation (Fig. 61);
Fig. 60
3. Pull the electrode from the
combustion chamber (Fig. 64);
Fig. 63
3. Remove the electrode cable H
from the ignitor (Fig. 67);
H
Fig. 66
4. Reassemble in reverse order,
check all seals are undamaged
and the burner is positioned
correctly (Fig. 62).
Fig. 61
4. Disconnect the detection elec-
trode cable (Fig. 65).
5. Reassemble in reverse order.
Fig. 64
4. Unscrew the 2 screws I on the
electrode (Fig. 68);
I
Fig. 67
Fig. 62
Fig. 65
Fig. 68