Mobile Data; Send Mobile Data; Send Mobile Data With A Prefix - Mitel 5604 User Manual

Messaging

Mobile Data

Note: This is a system dependent feature for the 5604 Services license only.

Send Mobile Data

You can send user entered data from the handset by pressing a pre-programmed hot key or
soft key, or selecting a service. Mobile data can be used for actions such as opening a door,
or starting or stopping a machine. The data can either be predefined, or entered after the hot
key/soft key is pressed or service is selected.
The data can be predefined when programming the soft/hot key or service. See "Define a Soft
Key" on page 71, "Define a Hot Key" on page 72, or "Add a Service" on page 73.

Send Mobile Data with a Prefix

Mobile data with a prefix is sent from the handset by entering data and then pressing a
pre-programmed hot key or soft key or selecting a service. Mobile data with a prefix can be
used to send information to an application in the system.
You define the prefix when you program the hot/soft key or service. See "Define a Hot Key" on
page 72.
49