Extension Cords; Accessories And Attachments - Bosch PL1682 Operating/Safety Instructions Manual

BM 2610021505 02-12_BM 2610021505 02-12.qxp 9/18/12 2:56 PM Page 13
If an extension cord is
WARNING
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use
3-wire extension cords that have 3-prong
plugs and receptacles
NOTE: The smaller the gauge number, the
heavier the cord.
* Woodrazor reversible TC micro grain
blades (2)
* 2.5 mm blade wrench
** Deluxe guide fence
** Vacuum hoses
** Vacuum hose adapters

Extension Cords

.
Accessories & Attachments
RECOMMENDED SIZES OF ExTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
25 50
3-6 18 16
6-8
18 16
8-10 18 16
10-12 16 16
12-16 14 12
* Standard guide fence
** Rabbeting depth stop
* Chip bag
(*= standard equipment)
(**= optional accessories)
-13-
Wire Sizes in mm
Cord Length in Meters
100 150 15 30 60 120
16 14 0.75 0.75 1.5 2.5
14 12 0.75 1.0 2.5 4.0
14 12 0.75 1.0 2.5 4.0
14 12 1.0 2.5 4.0 —
— — — — — —
2