Table of Contents
Advertisement
User Manual of Day/Night High‐definition dome Camera
Press up/down to "BLUE" and "RED", press left/right to adjust the value. Then move the cursor to
"RETURN", press confirm button to return to the previous menu.
ATC: Automatically white balance control. It is usually used for place that color temperature is stable.
3.2.4 BLC/ECLIPSE Settings
BLC: Back Light Compensation
Move cursor to "BLC/ECLIPSE", press left/right to "BLC" and press confirm button to enter the BLC SETUP
menu. And the menu is displayed on the screen:
Move cursor to "VALUE" to select LOW, MID or HIGH.
Move cursor to "AREA", press confirm button to enter the submenu. First, press direction button to set the
BLC area position as up, down, left, right and middle, then press confirm button to set the size of BLC area
in the same way. Press confirm button to choose "RET" to return to the previous menu or "AGAIN" to reset
position and size.
Move cursor to "DEFAULT" to set VALUE and AREA back to default setting.
Move the cursor to "RETURN", press confirm button to return to the previous menu.
ECLIPSE
Move cursor to "BLC/ECLIPSE", press left/right to "ECLIPSE" and press confirm button to enter ECLIPSE
SETUP menu.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
19
Advertisement
Table of Contents
