Miele H 217 B Operating Instructions Manual page 15

The "– /+" button is used to input all
entries or alterations to the oven.
Temperature or time can be altered in
increments, by pressing the "– /+" but-
ton briefly, or more rapidly by holding
the button in.
"–" button:
To select a lower temperature, earlier
time or shorter period.
"+" button:
To select a higher temperature, later
time or longer period.
The increase / decrease is changed
– for the oven temperature in 10°F
(5°C) steps,
– for the core temperature in 2°F (1°C)
steps,
– for the Minute Minder in 1 min. steps.
Temperature or time can be entered as
follows:
Press the required button.
Enter the time or temperature imme-
diately using the "– /+" button.
As long as the indicator lamp in the
center of the "– /+" button is lit, a time
or temperature can be entered or al-
tered.
The indicator lamp in the "– /+" but-
ton lights up:
– when a cooking mode has been se-
lected (except for "Light"),
– if the "p" button is pressed during the
cooking process,
– if the "e" button is pressed when
cooking with the roast probe,
– if the "l" button is pressed.
When the indicator lamp goes out, the
entry has been stored.
Symbols and figures which appear in
the oven display:
– "e", whenever the roast probe is
connected.
"e" and the core temperature you set
always takes precedence whenever
the roast probe is connected.
– The oven temperature and "p" when
the probe is not being used.
– "l" always appears when a time has
been entered into the Minute Min-
der. If a time has been entered while
the oven is in use, it will appear
along with the oven temperature. If
only the Minute Minder is being
used, it will appear with a time count-
down.
Oven operation
15