Download Print this page

Denon CDR-WI500 Operating Instructions Manual page 7

Cd recorder

Advertisement

l
Only load one disc. Loading two or more discs I" a layer WIII
cause breakdown and may also scratch the discs.
l
DISCS of the 8 cm sze should be carefully allgned wth the
recessed disc guide area and loaded wthout
the "se of an
adapter. If not properly loaded, the disc may fall o"t or the
disc holder may cease to open.
l
Be careful
not to get your finger
caught when the disc
holder IS clang
l
Do not place anything other than a disc on the disc tray.
l
Do not use discs that are cracked, misshapen. or have been
repared wth an adhewe,
etc.
l
Do not use discs that have adhewe
coming
out from
cellophane
tape or the label of a rental disc, or adheswe
remanng
after removal of the label. Use of a disc in this
condltlon
may result I" the disc not bang
ejected
or I"
breakdown.
q
RESTRICTIONS RELATED TO THE CD-R/RW STANDARDS
* Standards
concerned
wth
CD recorder
playback have been established
based on the ex,stl"g
standards
of CD players,
however. for recording, the method differs from that used with ewtfng
cassette decks and MD recorders, etc. In view of this.
please gain a good understandlng
of the followng
restrfctaons associated wth CD-R/RW dascs and enjoy the medium.
l
Only audn CD-RIRW discs can be recorded with this urxt "IL&E:
iiiiri
i L '?: " WIII be displayed when a disc other than one
for use with audto such as a CD-RIRW disc for use wth a personal computer or another type of disc !s loaded (See "DISCS that
Can Be Used with this Unit" on Page 5 )
l
CD-R discs can be recorded to only once The recorded InformatIon cannot be erased.
l
The recorded lnformatlon
of CD-RW discs can be erased. When this disc has been flnallzed, erase after the flnallzatlon removal
operation has been performed
(See "Cancellation
of CD-RW disc flnallzlng" on Page 28 1
l
Recording mistakes made wth CD-R discs cannot be erased: therefore,
It IS recommended
that a CD-RW disc be used until you
are accustomed to the recording operat,on.
l
The recording operation procedure IS the same for CD-R discs and CD-RW discs
l
When maklng addlt!onal recording to a previously recorded disc, the end of the last track IS detected and recording IS started
from there
l
The record standby mode cannot be set for CD-RIRW discs with a recordable
time of about 8 seconds or less remanlng.
c
" WIII be dIsplayed at this tune.
l
Songs with a recording time of less than 4 seconds cannot be recorded
l
A maxmum
of 99 tracks can be recorded to one CD-RIRW disc When the recording reaches the 99th track, "Q 8 5.
Fcil
" IS
displayed and recordings beyond this track WIII not be possible.
l
DIgItal recording IS not possible from CD-R/RW discs onto which have been dlgltally recorded, normal 1s !t possible from MD or
DAT. etc When a dlgltal recording IS attempted
from such sources. "iaw
?ror-i
8 h / -i" IS displayed. To record from these
dIgItal sources, make the recording from the analog Input. ISee "DIgital Copses" on Page 6.1
l
This unit cannot record CD-ROM and other non-audio signal sources. When an attempt
IS made to record from such sources.
S( I.1 > ',.. --'/. ,../I.- t
t " ,s dlsplaved
l
When a recording IS made from a disc that Includes data other than audio signals such as CD graphics or CD-TEXT, only the
audio slgnal 1s recorded; other data IS not recorded
l
DVD (Dolby DIgItal, DTS, and other compressed
audio signals) cannot be recorded.
l
Finalization processing on a CD-R disc that has been recorded with this unit will permit that disc to be played on ordinary CD
Player (See "Flnallzlng CD-R/RW DISC" on Page 27.)
l
Flnallzatlon processng on a CD-RW disc that has been recorded with this wxt will permit that disc to be played only on a CD player
designed to be used vwth CD-RW discs or on another CD recorder (See "Flnallzatlon Processing of CD-RW DISCS" on Page 6.1
NOTES:
' TO assure accurate recording. record with an ambent
temperature
of 30 "C or less.
l
DO not obstruct the ventilation holes on the top.
l
Recording may stop if the unit IS subject to shocks during recording.
If recording stops, It may no longer be possible to
"se the dasc normally.
q
CONNECTIONS
l
Use the supplied pin plug cable when
maklng connectlow
with the analog
Input/output
jacks.
a Input:
Connect the analog input jacks [ANALOG
IN) of this unit with the output jacks of
the ampllfler (MD or TAPE).
0 Output:
Connect the analog output jacks
(ANALOG OUTI of thfs unit with the
Input jacks of the amplIfter (MD or TAPEI.
@ CD-only output:
Only the CD side sound IS output.
Connect to the ampllfw's
input lacks
(CD, etc )
* In the dual mode, only the sound of
the CD-R side IS output from the
CD/CD-R output jacks. so th!s
connectnn
IS requwed.
Power
SUPPlY
outlet
Ampllfler
en
Power
SUPPlY
outlet
12ov
60 Hz
-
120v
60 Hz
. Please use optlcal fiber cables, which IS
wallable on the market, when maklng
connectnns
to the dytal
(OPTICAL)
Input/output
jacks
MD recorder
Use 75Qlohms
pin plug cable, which IS
awlable
on the market, when maklng
connect,ons to the dIgItal (COAXIAL)
Input/output
jacks.
0 hmut:
Power SUDDIV outlet
Connections
with Playback Equipment
such as the CD Players
The dIgItal Input jacks of this ""It (ather
DIGITAL IN OPTICAL or DIGITAL IN
COAXIAL) should be connected with the
dIgital output lacks of the CD player
(OPTICAL or COAXIALI.
0 Output:
Connections
with Equipment
having a
Digital Input such as the MD Recorder
The dIgItal output jacks of this u",t (either
DIGITAL OUT OPTICAL or DIGITAL OUT
COAXIAL) should be connected wth the
dIgItal input jacks of the MD recorder or
other equipment
(OPTICAL or COAXIAL)
@ CD-only output:
Only the CD side sound IS output.
Connect to the dIgItal Input jacks of an
MD recorder, etc
NOTES:
l
Do not plug the power plug Into the power outlet until all connectlow
have been completed.
l
Connect the red plug of the p,n plug cable !"to the R (right) jack and the whtte plug Into the L (left) jack.
l
Do not make a connection to the PHONO jack of the amplrfler
Doing so WIII lead to breakdown
l
Firmly plug I" the power plug. An Imperfect connection WIII cause Norse to be generated
l
Bundltng the connectlo"
cables together with the power cable WIII cause hum or other no,se.
l
When the power plug IS disconnected
from the power outlet. Walt about 5 seconds before relnsenlng.
7

Advertisement

loading