Advertisement
1. Relay play
* With the relay play mode it IS possible to play the disc in the CD side and the one I" the CD-R side. relaying between them.
* The programmed
play and random play modes can be preset for the discs in the CD and CD-R units.
Select the CD side
1
IMan unit)
I
7-
I I
I
-
4
2
1
1
3
1
Load the discs you want to play in the CD and CD-R "nits
2
Press the RELAY MODE button and select "r 31; 3
: P:"'
l
The "RELAY"
indicator Itghts
Use the CD or CD-R section repeat l/ALL button on the remote control "n,t to turn the repeat mode on or off
l
The l-track repeat mode cannot be set I" the relay mode.
l
The relay opeiat~on IS performed as shown below according to the comblnatlon
of the relay and repeat modes
3
Repeat mode
Relay operalo"
Repeat on "REPEAT"
CD side playback +
CD-R side playback
Indicator Ilt
Repeat off
CD side playback +
CD-R side playback
+
Stop
Relay play starts when the CD unit's play button IS pressed.
4
. The sound IS output from the CD/CD-R output jacks
. To qwf the relay mode, press the relay mode button and select "
I.
$ "
l
The disc I" the side that IS not operat,ng can be replaced during relay playback
NOTE:
l
When relaying between
a CD and CD-R. the dtgltal data from the CD/CD-R dtgltal output
terminal
IS interrupted
momentarily
The dIgItal input of the connected external device IS temporarily
unlocked at this time
2. Mix mode
* In the Max mode. programmed
play and random play of the d!sc in the CD unit and the one IV the CD-R unit can be performed
as
if the two discs were a single disc
(1) Mix programmed
playback
(Man unit)
1
(Remote control unit)
1
Load the discs you want to play I" the CD and CD-R ""1%.
2
Press the RELAY MODE button and select "
= La
"
l
The "MIX" indicator Ilghts.
3
Press the CD or CD-R une's PROG/DIRECT button on the remote control unit to set the program mode.
l
The "PROG" indicator Ilghts.
Follow the procedure at "Programmed
playback"
on Page 21 to program the tracks I" the order I" which you want to
play them
4
l
You can program tracks for both the CD and CD-R units by uswg the CD/CD-R selector switch on the remote control
u",t to switch between them
l
Up to 30 tracks can be programmed
MIX programmed
playback starts when the CD or CD-R unit's play button IS pressed.
5
l
The sound 1s output from the CD/CD-R output jacks
l
To quit the mix mode, press the relay mode button and select "!
e 7 L = "
NOTE:
l
When relaying
between
a CD and CD-R. the dIgItal data from the CD/CD-R dIgItal o"tp"t
terminal
IS interrupted
momentarily.
The digltal Input of the connected external dewce IS temporarily
unlocked at this tome.
25
Advertisement
