4.
Commissioning
This chapter describes the steps required to commission the product.
Inserting batteries/rechargeable batteries and a radio module (accessory
part):
Undo the two screws on the rear of the instrument and lift off the battery
1
compartment cover.
Insert batteries/rechargeable batteries (3x mignon) into the battery
2
compartment. Observe the polarity!
Push the radio module (accessory part) into the radio module
3
compartment until it engages in place. Note the guide groove.
Replace the battery compartment cover, press down and secure by
4
tightening the two screws.
4. Commissioning 9