Using The Product; Commissioning - TESTO 622 Instruction Manual

6 Using the product

6 Using the product
1.

Commissioning

The date and time must be set on commissioning.
1. Select the required function with [Set].
> The adjustable parameter flashes.
2. Set values with
settings, see following table).
- Instrument returns to the display.
Display
DD.MM.YYYY
or
MM.DD.YYYY
Year flashes
Month flashes
Day flashes
24H or
flash
Hour flashes
Minute flashes
Second flashes
¨C
flashes
30
If no button is pressed > 30 sec, the testo 622 changes to
Measuring Mode. To perform additional settings, press and
[Set]
hold for 2 sec.
[ ] or [ ]
To scroll rapidly forward and back in the relevant menu,
[ or ].
press and hold
Press [Esc] to cancel settings without saving them.
Hold [Set] down for 2 s to save previously set values and
leave the menu.
Function
flashes Set date format
flashes
Set year
Set month
Set day
12H (AM/PM)
Set time format
Set hour value
Set minute value
Set second value 00 - 59
Set unit for
temperature
If the power supply is interrupted the settings are being
saved for at least 3 min.
and confirm entry with
Setting option
DD.MM.YYYY
month, year
MM.DD.YYYY
month, day, year
2009 - 2099
01 - 12
01 - 31
24h/12h
00 - 23 or 01 - 12
00 - 59
¨C/¨F
[Set] (for
= day,
=