TESTO 435 Short Manual

Short manual
This short manual provides an overview of important functions of the product. Please be
sure to read the instuction manual before using the product!

Button functions

Button Functions
Function button (3x): The function depends on the button assignment at the time
Change display of the 1st reading line
In configuration mode: Increase value (press and hold to increase rapidly), select option
Change display of the 2nd reading line
In configuration mode: Decrease value (press and hold to decrease rapidly), select option
Print data
435-1 / -2 only: If the Cyclical Printing function is activated, the programmed measuring program is started.
Switch instrument on, switch display light on/off;
switch instrument off (press and hold)

Function buttons (Function dependant on profile and setting)

Button
OK
ESC
/
Hold ACT
Reset
Mean
Measp
/
Start End
Save
Turb
Area
P=0
Functions
Open (main) menu
Enter confirmation
Cancel
Hold value/display current measurement value
Reset max./min. values to current measurement value
Open menu item "Multi-point mean calculation"
Open menu item "Measuring program" (435-2/-4 only) 435>
Start/end test series (435-2/-4 only)
Save values (435-2/-4 only)
Activate "Turb" test series (435-2/-4 only with attached turbulence probe)
Open menu item "Area"
Zero internal pressure sensor (435-3/-4 only)
Multifunction measuring instrument
testo 435
en