Watching the TV
Buttons for LCD
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
Press until the TV indicator lights up.
This activates the remote control for use with the LCD projection TV.
2 ANT— (AUX input)
Press to change between the VHF/UHF input and the AUX input.
Turns the LCD projection TV on and off. If a video input indication (e.g.,
VIDEO 1, VIDEO 2) appears on the screen, press
a channel number appears.
4 0-9 and ENTER
Use for direct channel selection. Press
to select channel 10, press
or you can press
5 CH +/–
Press to scan through the channels (+ up or – down).
6 VOL +/–
Press to adjust the volume (+ up or – down).
Press to alternate or jump back and forth between two channels. The LCD
projection TV will jump between the current channel and the last channel
Press to mute the sound. "MUTING" will appear on the screen and will dim
three seconds later. To restore the sound, press again or press
This is useful when you need to copy down information that appears on the
LCD projection TV's screen (see "Using the Freeze Function" on page 54).
Press to display the channel number, current time and channel label (if set).
To turn the display off, press
to select a channel (for example,
). The channel will change after 2 seconds,
for immediate selection.
Using the Features
CH +/ –