Broadcom NetXtreme II User Manual page 230

NetXtreme II
Command Options
uediag
uediag -c <device#>
uediag -cof
uediag -dev <device#>
uediag -F
uediag -fbc <bc_image>
uediag -fbc1 <bc1_image>
uediag -fbc2 <bc2_image>
uediag -fl2b <l2b_image>
uediag -fib <ib_image>
uediag -fibc
uediag -fibc2
uediag -fibp
uediag -fipmi <ipmi_image>
uediag -fmba <mba_image>
uediag -fnvm <raw_image>
uediag -fump <ump_image>
uediag -help
uediag -I <iteration#>
uediag -idmatch
uediag -log <logfile>
uediag -mba <1/0>
uediag -mbap <n>
uediag -mbav <1/0>
uediag -mbavval <n>
uediag -mfw <1/0>
uediag -t <groups/tests>
uediag -T <groups/tests>
uediag -ver
Page 230 Performing Diagnostics
Table 2: uediag Command Options
Description
Performs all tests on all Broadcom NetXtreme II adapters in your system.
Specifies the adapter (device#) to test. Similar to -dev (for backward compatibility).
Allows tests to continue after detecting a failure.
Specifies the adapter (device#) to test.
Forces an upgrade of the image without checking the version.
Specifies the bin file to update the bootcode.
Specifies the bin file to update bootcode 1.
Specifies the bin file to update bootcode 2.
Specifies the bin file for L2B firmware.
Specifies the bin file for iSCSI boot.
Programs iSCSI configuration block 0. Used only with -fib <ib_image>.
Programs iSCSI configuration block 1. Used only with -fib <ib_image>.
Programs iSCSI configuration software. Used only with -fib <ib_image>.
Specifies the bin file to update IPMI firmware.
Specifies the bin file to update the MBA.
Programs the raw image into NVM.
Specifies the bin file to update UMP firmware.
Displays the Broadcom NetXtreme II User Diagnostics (uediag) command options.
Specifies the number of iterations to run on the selected tests.
Enables matching of VID, DID, SVID, and SSID from the image file with device IDs: Used
only with -fnvm <raw_image>.
Logs the tests results to a specified log file.
Enables/disables Multiple Boot Agent (MBA) protocol.
1 = Enable
0 = Disable
Sets the MBA boot protocol.
0 = PXE
1 = RPL
2 = BOOTP
3 = iSCSI_Boot
Enables/disables MBA VLAN.
1 = Enable
0 = Disable
Sets MBA VLAN (<65536).
Enables/disables management firmware.
1 = Enable
0 = Disable
Disables certain groups/tests.
Enables certain groups/tests.
Displays the version of Broadcom NetXtreme II User Diagnostics (uediag) and all installed
adapters.
Bro adco m C orp or atio n
User Guide
January 2010
Document ENGSRVT52-CDUM100-R