Broadcom NetXtreme II User Manual page 191

User Guide
January 2010
5. Type the team name and then click Next. If you want to review or change any of your settings, click Back. Click Cancel
to discard your settings and exit the wizard.
NOTE: The team name cannot exceed 39 characters, cannot begin with spaces, and cannot contain any of the
following characters: & \ / : * ? < > |
6. Select the type of team you want to create. If the team type is an SLB type team, click Next. If the team type is not an
SLB type team, then a dialog box appears. Verify that the network switch connected to the team members is configured
correctly for the team type, click OK, and continue.
NOTE: NetXtreme II network adapters with iSCSI enabled is supported only in an SLB team type. To continue with
the creation of non-SLB team types, first disable iSCSI by deselecting iSCSI Offload Engine from the Resource
Reservations area of the Configurations tab.
Document ENGSRVT52-CDUM100-R
Bro adco m Co rp or atio n
NetXtreme II
Configuring Teaming Page 191