Rpm Installation - Broadcom NetXtreme II User Manual

Table of Contents

Advertisement

User Guide
January 2010
U
/R
NLOADING
EMOVING THE
Unloading/Removing the Driver from an RPM Installation
Removing the Driver from a TAR Installation
U
/R
NLOADING
EMOVING THE
NOTES:
The examples used in this procedure refer to the bnx2 driver, but also apply to the bnx2x driver.
On 2.6 kernels, it is not necessary to bring down the eth# interfaces before unloading the driver module.
If the cnic driver is loaded, unload the cnic driver before unloading the bnx2 driver.
Prior to unloading the bnx2i driver, disconnect all active iSCSI sessions to targets.
To unload the driver, use ifconfig to bring down all eth# interfaces opened by the driver, and then type the following:
rmmod bnx2
If the driver was installed using rpm, do the following to remove it:
rpm -e netxtreme2
R
D
EMOVING THE
RIVER FROM A
NOTE: The examples used in this procedure refer to the bnx2 driver, but also apply to the bnx2x and bnx2i drivers.
If the driver was installed using make install from the tar file, the bnx2.o or bnx2.ko driver file has to be manually deleted from
the operating system. See
P
PCI F
ATCHING
NOTE: The examples used in this procedure refer to the bnx2 driver, but also apply to the bnx2x and bnx2i drivers.
For hardware detection utilities such as Red Hat kudzu to properly identify bnx2 supported devices, a number of files
containing PCI vendor and device information may need to be updated.
Apply the updates by running the scripts provided in the supplemental tar file. For example, on Red Hat Enterprise Linux,
apply the updates by doing the following:
./patch_pcitbl.sh
/usr/share/hwdata/pcitable.new bnx2
./patch_pciids.sh /usr/share/hwdata/pci.ids pci.updates
/usr/share/hwdata/pci.ids.new
Document
ENGSRVT52-CDUM100-R
L
INUX
D
RIVER FROM AN
TAR I
NSTALLATION
Installing the Source RPM Package
(O
ILES
PTIONAL
/usr/share/hwdata/pcitable pci.updates
Bro adco m Co rp or atio n
D
RIVER
RPM I
NSTALLATION
for the location of the installed driver.
)
Unloading/Removing the Linux Driver
NetXtreme II
Page 127

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetXtreme II and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Bcm5708cBcm5708sBcm5706cBcm5706s

Table of Contents