Using Mpeg Noise Reduction; Using Dynamic Contrast - Toshiba 56MX195 Owner's Manual

Adjusting the picture

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce visible
interference caused by MPEG compression. Choices for MPEG
noise reduction are High, Medium, Low and Off. Off is
automatically selected when this feature is disabled ("grayed
out"). This feature is not available in the PC input mode.
To select MPEG Noise Reduction preferences:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
3. In the MPEG Noise Reduction field, select your desired
setting.
Advanced Picture Settings
Dynamic Contrast
MPEG Noise Reduction
CableClear
Color Temperature
Lamp Mode
Color Management
Reset
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Downloaded from www.Manualslib.com
Chapter 8: Using the TV's features
(continued)
ANT 1
On
Low
Auto
Cool
Low Power
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
manuals search engine

Using dynamic contrast

When dynamic contrast is set to "On," the TV will detect
changes in the picture quality that affect the appearance of your
contrast settings and automatically adjust the video.When
dynamic contrast is set to "Off," the settings selected in the
Contrast field in Picture Settings will be used.
To select dynamic contrast preferences:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
3. In the Dynamic Contrast field, select either On or Off.
Advanced Picture Settings
Dynamic Contrast On
MPEG Noise Reduction Low
CableClear Auto
Color Temperature Cool
Lamp Mode Low Power
Color Management
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Note:
If you select one of the factory-set picture modes (Sports,
Standard, or Movie) and then change the dynamic contrast to
"On," the picture mode automatically changes to Preference in
the Picture Settings menu.
ANT 1
87