Turning Off The Built-In Speakers; Selecting The Optical Audio Output Format - Toshiba 56MX195 Owner's Manual

Adjusting the audio

Turning off the built-in speakers

Use this feature to turn off the TV speakers when you connect
an audio system to your TV (see "Connecting a digital audio
system" and "Connecting an analog audio system" on page 20).
To turn off the built-in speakers:
1. Press MENU and open
the Audio menu.
2. Highlight Audio Setup
and press ENTER.
3. In the Speakers field,
select Off.
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To turn on the built-in speakers:
Select On in step 3 above.
Selecting the optical audio output
format
Use this feature to select the optical audio output format when
you connect a Dolby Digital decoder or other digital audio
system to the Optical Audio Out terminal on the TV (see
"Connecting a digital audio system" on page 20).
To select the optical audio output format:
1. Press MENU and open
the Audio menu.
2. Highlight Audio Setup
and press ENTER.
3. In the Optical Output
Format field, select either
Dolby Digital or PCM,
depending on your
device.
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Downloaded from www.Manualslib.com
Chapter 8: Using the TV's features
(continued)
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Audio Setup
MTS Stereo
Language English
Speakers
Optical Output Format Dolby Digital
Reset Done
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Audio Setup
MTS Stereo
Language English
Speakers
Optical Output Format Dolby Digital
Reset Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
manuals search engine
On
On
93