Using The Pc Setting Feature - Toshiba 56MX195 Owner's Manual

Using the PC setting feature

You can adjust the horizontal position/size, vertical position/size,
clock phase, and sampling clock. This feature will be grayed out
on the menu unless there is a PC connected to the TV (See
"Connecting a personal computer (PC)" on page 29.)
To set the PC setting:
1. Confirm a PC is connected (see "Connecting a personal
computer (PC)" on page 29).
2. Repeatedly press INPUT to select PC input mode. (See
Selecting the video input source to view " on page 72.)
3. Press MENU and open the Setup menu.
4. Highlight PC Settings and press ENTER.
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI 1 Audio
HDMI 2 Audio
Slide Show Interval
Navigate
5. Press y or z to highlight the item you want to adjust.
6. Press x or • to make the appropriate adjustments.
PC Settings
Horizontal Position
Horizontal Width
Vertical Position
Vertical Height
Clock Phase
Sampling Clock
Reset
• Horizontal Position/Vertical Position:
Adjusts picture left/right and up/down. The adjustment range
is within ±5 from center.
(The adjustable range may vary depending on the input mode.)
• Horizontal Width/Vertical Hegiht:
Adjusts picture width of Horizontal and picture height of Vertical.
The adjustment range is within ±5 from center.
• Clock Phase:
This function is to reduce noise and sharpen the picture.
The adjustment range is within ±15 from center.
• Sampling Clock:
This function is to minimize periodic vertical stripes on the
screen.
The adjustment range is within ±15 from center.
Downloaded from www.Manualslib.com
Chapter 8: Using the TV's features
Auto
Auto
2 Sec
Select CH RTN Back EXIT Exit
0
0
0
0
0
0
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
manuals search engine
95