Using Mpeg Noise Reduction; Selecting The Color Temperature; Selecting The Lamp Mode; Hmx96 (E/F) Web 213:276 - Toshiba 50HMX96 Operating Manual

HMX96_EN.book Page 55 Friday, April 28, 2006 12:03 PM

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
("grayed out").
To select the MPEG noise reduction level:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Vertical Edge Enhancer
Color Management
Game Mode Color Management
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

Selecting the color temperature

You can change the quality of the picture by selecting from
three preset color temperatures (cool, medium, and warm), as
described below.
Mode Picture Quality
cool blueish
medium neutral
warm reddish
To select the color temperature:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Vertical Edge Enhancer
Color Management
Game Mode Color Management
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Chapter 6: Using the TV's advanced features

Selecting the lamp mode

You can select either the High Bright or Low Power lamp
mode.
•
To select the lamp mode:
1
2
ANT 1
3
High
Auto
Low
Cool
Low Power
Middle
Off
Done
4
ANT 1
High
Auto
Low
Cool
Low Power
Middle
Off
Done
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference in the Picture Settings menu.
The High Bright mode is useful when additional picture
brightness is desired (such as in a bright room).
Press Y and open the Video menu.
Highlight Advanced Picture Settings and press T.
In the Lamp Mode field, select High Bright or Low
Power, whichever you prefer.
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode Low Power
Vertical Edge Enhancer
Color Management
Game Mode
Color Management
Reset Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you set the lamp mode to Low Power, each time
you turn on the TV, the lamp will start out in High Bright
mode but will switch to Low Power mode after a short
period of time. You may notice a change in screen
brightness when this happens. This is normal and is not a
sign of malfunction.
ANT 1
High
Auto
Low
Cool
Middle
Off
55

HMX96 (E/F) Web 213:276