Tuning Channels; Using The Channelbrowser - Toshiba 56MX195 Owner's Manual

Tuning channels

Using the ChannelBrowser™

The channel browser stores the most recently viewed channels (up to 32) in the channel history. This feature allows you to:
• Keep a separate, temporary* history of the last 32 channels tuned from each of three inputs: ANT 1, ANT 2, and Cable Box.
*Note: Turning off the TV will clear the channel history for all three inputs.
• Quickly surf and tune your recently viewed channels from the channel browser banner (illustrated below).
• Surf via Browse mode (to immediately tune channels as you highlight them in the channel browser banner) or Select mode (to surf
over channels in the browser banner before you select one to tune).
• Set a "HOME" channel for the ANT 1, ANT 2, and Cable Box inputs.
To open the channel browser banner: Press x ( ), • ( ), or ENTER on the remote control.
– Press x ( ) to surf back from the most recently viewed channel through the last 32 channels that were tuned from the current
input, which are automatically stored in the channel history for the current input (ANT 1, ANT 2, or Cable Box only).
– Press • ( ) to surf forward from the previous channels in the channel history up to the most recently viewed channel.
Elements of the channel browser banner
Active channel
status
(Displays in this area
only if available.)
12-3
12345678
Select Mode
CB
Current mode
(Select or Browse)
To toggle between Browse mode and Select mode:
After opening the channel browser banner, press y or z to toggle between Browse mode and Select mode. The "Current mode" field
on the channel browser banner will flash green.
To tune to a channel in Browse mode:
1. While watching TV, press x ( ) or •( ) to open the
channel browser banner and surf back to a previous channel
or forward to the next channel in the channel history.
In Browse mode, when you stop on a channel number in
the browser banner, it will be highlighted with a yellow
outline and the TV will automatically tune to the channel.
2. Press EXIT to close the channel browser banner.
3
Browse Mode ANT 1
In Browse mode, the highlighted channel number is outlined
in yellow and the channel will be tuned to automatically.
Note: The channel browser close automatically if you do not
make a selection within 60 seconds.
74
Downloaded from www.Manualslib.com
Chapter 8: Using the TV's features
Highlighted channel Channels stored
in the channel
(Displays with a yellow
history
background in Select mode.
Displays with a yellow
outline in Browse mode.)
14
ABCD-DTV
ANT 1
Current
input antenna type
(cable or TV)
Note: The channel browser banner opens in Browse mode by default.
2 102-1
CABLE Ch.102-1 1080i
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
manuals search engine
(In Browse mode, because the highlighted
channel is tuned automatically, the active
channel and the highlighted channel
26-1 17-2
QRS TUV
CABLE 3 XYZ
Current Active Channel call
channel letters
number (if available)
To tune to a channel in Select mode:
1. While watching TV, press x ( ) or •( ) to open the
channel browser banner and surf back to a previous channel
or forward to the next channel in the channel history.
In Select mode, when you stop on a channel number in
the browser banner, it will be highlighted with a yellow
background but the TV will not automatically tune to the
channel.
2. Press ENTER to tune the TV to the highlighted channel.
Hold HOME key
3 sec to program 3. Press EXIT to close the channel browser banner.
Ch.3
3
Select Mode
Active channel Home channel instructions
[Press x (
will always be the same.)
3
Hold HOME key
XYZ 3 sec to program
480p
Resolution
2 102-1
ANT 1 CABLE Ch.102-1
In Select mode, the highlighted channel number has a
yellow background. Press ENTER to tune to the channel.
) or • (
)
to surf the other channels
in the channel history.]
17-2
Home channel
Hold HOME key
3 sec to program
Ch.3
1080i