Chapter 6: Using The Tv's Advanced Features; Using The Advanced Picture Settings Features; Using Dynamic Contrast; Using Cableclear ® /Dnr (Digital Noise Reduction) - Toshiba TheaterWide 50HM66 Operating Manual

HM66_EN.book Page 41 Thursday, February 23, 2006 2:49 PM

Chapter 6: Using the TV's advanced features

Using the advanced picture settings
features

Using dynamic contrast

When dynamic contrast is set to
changes in the picture quality that affect the appearance of your
contrast settings and then automatically adjust the video.
When dynamic contrast is set to
Contrast field in Picture Settings
To select dynamic contrast preferences:
1
Press Y and open the
2
Highlight Advanced Picture Settings
3
In the
Dynamic Contrast
\
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Game Mode
Reset
4
To save the new settings, highlight
revert to the factory defaults, highlight
T.
Note: If you select the Movie picture mode and then set
the dynamic contrast to On, the picture mode will
automatically change to Preference in the Picture
Settings menu.
®
Using CableClear /DNR (digital noise
reduction)
®
The CableClear digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear/DNR settings:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
In the CableClear/DNR field, select your desired
setting.
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Game Mode
Reset
, the TV will detect
On
, the settings selected in the
Off
will be used.
Video menu.
and press T.
field, select either or .
On Off
ANT 1
On
Auto
Low
Cool
Low Power
Off
Done
and press T. To
Done
Reset and press
ANT 1
On
Auto
Low
Cool
Low Power
Off
Done
Notes:
• If the current input is ANT 1, ANT 2, VIDEO 1, or VIDEO
2, the menu will display the text "CableClear." The
available selections are Off, Low, Middle, High, and
Auto.
• If the current input is ColorStream HD1, ColorStream
HD2, or HDMI, the menu will display the text DNR. The
available selections are Off, Low, Middle, High and
Auto. Auto will react proportionally to the strength of
the noise. Low, Middle, and High will reduce the noise
in varying degrees, from lowest to highest, respectively.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are
Off
is automatically selected when this feature is disabled ("grayed
out").
To select the MPEG noise reduction level:
1
Press Y and open the
Video
2
Highlight
Advanced Picture Settings
3
Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Game Mode
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
, , , and .
Low Middle High Off
menu.
and press T.
ANT 1
On
Auto
Low
Cool
Low Power
Off
Done
(continued)
41
HM66 (E/F) Web 213:276