Error Messages - Brother P-Touch PT-E500 User Manual

When an error message appears on the display, follow the directions provided below.
Message
Wrong Type Of
Adapter
Connected!
Low Battery!
Replace Battery!
Recharge Li-ion
Battery!
Li-ion is damaged
Use other power
source!
Unit Cooling Wait
XX min. before
restart!
Cutter Error!
Insert Tape
Cassette!
Text Full!
No Text!
Incorrect Value!
Tape Cassette
Changed!
Line Limit! Max 7
Lines
Tape Width Limit!
Max 5 Lines
Tape Width Limit!
Max 3 Lines
Tape Width Limit!
Max 2 Lines
Tape Width Limit!
Max 1 Line

Error Messages

An incompatible AC adapter is connected.
Use an appropriate AC adapter (AD-E001).
The installed batteries are getting weak.
The installed batteries are about to run out.
The battery is low. Please charge the lithium-ion battery.
The Li-ion is damaged. Please use an AC adapter (AD-E001), AA
size alkaline batteries (LR6) or AA size Ni-MH rechargeable batteries
(HR6).
High temperature error. Please wait following the message, and try
again.
The tape cutter has been closed when you tried to print or feed tape.
Turn the P-touch labeling system off and then on again before
continuing. When tape is twisted in the cutter, remove the tape.
There is no tape cassette installed when you try to print or preview a
label, or feed tape. Install a tape cassette before continuing.
The maximum number of characters have already been entered. Edit
the text and use fewer characters.
There is no text, symbols or bar code data entered when you try to
print or preview a label. Enter data before continuing.
The value entered for setting the tape length, multiple copies or the
numbering function is invalid. Enter a valid value for the setting.
The tape cassette selected for printing is different from the tape
cassette installed in the P-touch labeling system.
The maximum number of lines have already been entered. Limit the
number of lines to seven.
There are more than five lines of text when you press the Print or
Preview key while using 0.70" (18 mm) tape. Limit the number of
lines to five, or replace with a larger width tape cassette.
There are more than three lines of text when you press the Print or
Preview key while using 0.47" (12 mm) tape. Limit the number of
lines to three, or replace with a larger width tape cassette.
There are more than two lines of text when you press the Print or
Preview key while using 0.35" or 0.23" (9 mm or 6 mm) tape. Limit
the number of lines to two, or replace with a larger width tape
cassette.
There is more than one line of text when you press the Print or
Preview key while using 0.13" (3.5 mm) tape. Limit the number of
lines to one, or replace with a larger width tape cassette.
Cause/Remedy
1
2
3
4
5
6
7
8
49
Error Messages