Entering Accented Characters - Brother P-Touch PT-E500 User Manual

EDITING A LABEL
2
Select "Symbol History" using the
or Enter key. Then select "On" to create your personal category
by using the
3
Press the OK or Enter key to apply the setting.
The screen returns to the text entry screen.
4
Enter the symbol you wish to add to your History.
Refer to "Entering Symbols Using the Symbol Function" on
page 4 for detail.
5
Press the Symbol key.
The "History" appears, including the symbol entered in step 4.
• Up to 30 symbols can be added to the "History". The oldest symbol will be deleted from the
category when the symbols added to the "History" exceed 30 symbols.
• To stop using the Symbol History, select "Off" in the "Symbol History" screen.
The P-touch labeling system can display and print a set of accented characters such as other
language specific characters. Selectable "Accented Characters" are listed in the Appendix.
(See page 56)
1
Enter the character you wish to change to an accented character.
Caps mode can be used with the Accent function.
2
Press the Accent key.
The character you entered will change to an accented character.
3
Press the Accent key repeatedly until the desired accented character is selected, or
select it by using the
The order of accented characters displayed will differ depending on the selected LCD
language.
4
Press the OK or Enter key.
The selected accented character is inserted into the line of text.
Press the Esc key to return to the previous step.
6

Entering Accented Characters

or key.
Entering Accented Characters
or key.
or key and press the OK