Error Messages - Brother PT-H500 User Manual

TROUBLESHOOTING
When an error message appears on the display, follow the directions provided below.
Message
Wrong Type Of
Adapter Connected!
Low Battery!
Replace Battery!
Recharge Li-ion
Battery!
Li-ion is damaged Use
other power source!
Unit Cooling Wait XX
min. before restart!
Cutter Error!
Insert Tape Cassette!
Text Full!
No Text!
Line Limit! Max 7
Lines
Incorrect Value!
Tape Cassette
Changed!
Tape Width Limit!
Max 5 Lines
Tape Width Limit!
Max 3 Lines
Tape Width Limit!
Max 2 Lines
Tape Width Limit!
Max 1 Line
56

Error Messages

Error Messages
An incompatible AC adapter is connected.
Use an appropriate AC adapter.
The installed batteries are getting weak.
The installed batteries are about to run out.
The battery is low. Please charge the lithium-ion battery.
The Li-ion battery is damaged. Please use an AC adapter or an other
battery.
High temperature error.
The tape cutter is closed when you try to print or feed tape. Turn the
P-touch off and then on again before continuing. When tape is
twisted in the cutter, carefully remove the tape.
There is no tape cassette installed when you try to print or preview a
label, or feed tape. Install a tape cassette before continuing.
The maximum number of characters have already been entered. Edit
the text and use fewer characters.
There is no text, symbols or bar code data entered when you try to
print or preview a label. Enter data before continuing.
The maximum number of lines have already been entered. Limit the
number of lines to seven.
The value entered for setting the tape length, multiple copies or the
numbering function is invalid. Enter a valid value for the setting.
The tape cassette selected for printing is different from the tape
cassette installed in the P-touch.
There are more than five lines of text when you press the Print or
Preview key while using 18 mm tape. Limit the number of lines to
five, or replace with a larger width tape cassette.
There are more than three lines of text when you press the Print or
Preview key while using 12 mm tape. Limit the number of lines to
three, or replace with a larger width tape cassette.
There are more than two lines of text when you press the Print or
Preview key while using 9 mm or 6 mm tape. Limit the number of
lines to two, or replace with a larger width tape cassette.
There is more than one line of text when you press the Print or
Preview key while using 3.5 mm tape. Limit the number of lines to
one, or replace with a larger width tape cassette.
Cause/Remedy