Setting Auto Fit Style; Setting Frames - Brother P-Touch PT-E500 User Manual

EDITING A LABEL

Setting Auto Fit Style

When "Size" of the Style key is set to "Auto" and label length is set to a specific length, you
can select the way of reducing the text size to fit within the label length.
1
Press the Menu key, select "Advanced" using the
or Enter key.
2
Select "Auto Fit Style" using the
3
Select the style using the
• When "Text Size" is selected, the total text size is modified to fit within the label.
• When "Text Width" is selected, the text width will be reduced to the size of x1/2 setting.
(If further size reduction is required to fit the text into the selected label length, the total
text size will be modified after reducing the text width to x1/2 setting.)
4
Press the OK or Enter key to apply the settings.
• Press the Esc key to return to the previous step.
• Press the Space key to set the style to the default setting ("Text Size").
You can select the frame of the label by using the Style key. Selectable "Frames" are listed
in the Appendix. (See page 59)
1
Press the Style key. The current settings are displayed.
2
Select an attribute using the
selected, and then select a frame by using the
3
Press the OK or Enter key to apply the settings.
New settings are NOT applied if you do not press the OK or
Enter key.
• Press the Esc key to return to the previous step.
• Press the Space key to set the selected attribute to the default value.
8

Setting Frames

or key and then press the OK or Enter key.
or key.
Setting Frames
or key until the "Frame" is
or key, and then press the OK
or key.