Brother P-Touch PT-E500 User Manual page 52

Message
Insert HS 0.23"
Tube Cassette!
Insert HS 5.8mm
Tube Cassette!
Text Too Long!
Memory Full!
Check # of Digits
Entered!
Input A,B,C or D At
Start&End!
Maximum Of 5 Bar
Codes Per Label!
Text Too Large!
System Error 02!
Select Other Cut
Option!
Close Cover!
Installed tape is
not compatible
with this machine!
Line Limit! Max
297 Lines per
Label
Block Function is
not Allowed!
Line Limit! Max 3
Lines
This Function
Requires 0.35" or
Wider Tape!
This Function
Requires 9mm or
Wider Tape!
Sequence Type
Must be None
When Editing!
A 0.23" (5.8 mm) Heat Shrink Tube is not installed when Template for
0.23" (5.8 mm) Heat Shrink Tube is selected. Install a 0.23" (5.8 mm)
Heat Shrink Tube.
The length of the label to be printed using the text entered is longer
than the length setting. Edit the text to fit within the set length or
change the length setting.
There is not enough internal memory available when you try to save
a label file. Delete any unnecessary files to make more memory
available for the new label file.
The number of digits entered in the bar code data does not match the
number of digits set in the bar code parameters. Enter the correct
number of digits.
The bar code data entered does not have the required start/stop code
(A, B, C, or D required at the beginning and end of the bar code data
for the CODABAR protocol). Enter the bar code data correctly.
There are already five bar codes entered in the text data when you try
to enter a new bar code. You can only use up to five bar codes in each
label. You can enter up to two bar codes when
in flag layout.
The text size is too large. Select a different size option.
Please contact Brother customer service.
Refer to the Quick Setup Guide for the contact information.
The tape length set using the tape length setting is shorter than the
total length of the left and right margins applied for the "Large Margin"
cutting option. You have to select a different cutting option.
The rear cover is open. Close the cover when printing.
Tape that is incompatible with the P-touch labeling system has been
installed. Use a compatible tape.
Exceeds max. You can enter up to 297 lines in the whole page and
blocks.
In this setting, you cannot add or delete blocks.
PUNCH-DOWN BLOCK layout allows to print up to 3 lines / block.
PUNCH-DOWN BLOCK layout must use 9mm or wider tape
cassettes.
Texts cannot be edited when you set Sequence Type in PUNCH-
DOWN BLOCK to Horizontal or Backbone.
Cause/Remedy
is selected
1
2
3
4
5
6
7
8
51
Error Messages