Operating The Answering Machine On Your Cordless Handset; Change The Recall Time From Your Cordless Handset; Set The First Ring From Your Cordless Handset; Reset The Cordless Handset - AEG Solo Combo 15 User Manual

15.6

Change the Recall Time from your Cordless Handset

You may need to press
connected to a PBX (Private Exchange) or use certain network features. You should normally leave
the Recall Time at its default setting, Short (100ms), as this is the standard recall required in the UK
telephone network. However, it can be changed to Medium (270ms) or Long (600ms) if your telephone
is connected to a PBX that requires a different recall time.
From the home screen, press
Press to "ADVANCED SET" and then press
Press to "RECALL TIME" and then press
Press to select "SHORT", "MEDIUM" or "LONG" and then press
>A confirmation tone is played.
Press to return to standby mode.
15.7

Set the First Ring from your Cordless Handset

If you have subscribed to Caller Line Identification service and do not wish to hear the phone ring
before the caller identification is displayed, you can set the "FIRST RING" to "OFF".
From the home screen, press
Press to "ADVANCED SET" and then press
Press to "FIRST RING" and then press
Press to select "ON" or "OFF" and then press
>A confirmation tone is played.
Press to return to standby mode.
15.8

Reset the Cordless Handset

You can reset your cordless handset to its default settings with this feature.
Note:
Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will
return to its default settings. However, your phonebook will remain unchanged after reset. Also, if you
have an answering machine model, any recorded messages will remain unchanged, while all other
settings will be reset.
From the home screen, press
Press to "ADVANCED SET" and then press
Press to select "RESET" and then press
Press again to confirm.
>A confirmation tone is played and the unit is reset to its default settings.
16 OPERATING THE ANSWERING MACHINE ON YOUR
CORDLESS HANDSET
Your phone includes a telephone answering machine that records unanswered calls when it is on.
The answering machine can store up to 59 messages within the maximum recording time of
approximately 30 minutes and each message can be up to 3 minutes long.
When the answering machine is on, calls are answered after the set "RING DELAY".
If you have selected "ANSW.&RECORD" mode, the caller can leave you a message after hearing your
announcement.
to send a Flash signal (also called Recall or Timed Break Recall) if you are
.
.
.
to select.
to select.
to select.
to select.
to confirm.
to select.
to select.
27
to confirm.