Handset & Base Connection; Using Your Cordless Handset; Make A Call; Pre-Dialling - AEG Solo Combo 15 User Manual

8
7 HANDSET & BASE CONNECTION
When purchased, all handsets are already registered to the base unit and should link to it when they
are all powered up.
To use your cordless handset and base unit together, you must be able to establish a radio link
between them. The signal between the handset and the base unit is in accordance with the normal
standards for a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors.
Be aware that:
>Large metal objects, such as refrigerators, mirrors or filing cabinets, between the handset and the
base unit may block the radio signal.
>Solid structures, such as walls, may reduce the signal strength.
>Electrical equipment may cause interference and/or affect the range.
Do not place the base unit close to another telephone, TV or audio equipment - it may cause
interference.
Putting the base unit as high as possible ensures the best signal.
Out of Range warning. If you hear a warning tone during a call, and/or the sound in the earpiece
becomes faint or distorted, you may be going out of range of the base unit. Move nearer to the base
unit within 20 seconds; otherwise the line may be cut off.
8

USING YOUR CORDLESS HANDSET

8.1

Make a Call

8.1.1

Pre-dialling

Enter the phone number (maximum 24 digits).
If you make a mistake, press
Press to dial the phone number.
8.1.2 Direct Dialling
Press .
Dial the number (maximum 24 digits).
8.1.3 Call from the Redial List
Press key in standby mode.
>The last number dialled is displayed.
Press to select the desired entry in the redial list and then press
redial number.
8.1.4 Call from the Call Log
Press in standby mode.
Press to select the desired entry in the call log and then press
log number.
to delete the last entered number.
to dial out the selected
to dial out the selected call