Change The Time Format On Your Cordless Handset; Change The Date Format On Your Cordless Handset; Alarm Settings On Your Cordless Handset - AEG Solo Combo 15 User Manual

22
Enter the current time and press
>For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
>For 12-hour format, enter the time and then press
>If you make a mistake, press
>A confirmation tone is played.
Press to return to standby mode.
13.1.1

Change the Time Format on your Cordless Handset

The time can be displayed either as 12-hour or 24-hour. The default setting is "24 HOURS".
From the home screen, press
Press to "CLOCK&ALARM" and then
Press to "SET FORMAT" and then press
Press again to select "TIME FORMAT".
>The current setting is displayed.
Press to select "12 HOURS" or "24 HOURS" and then press
>A confirmation tone is played.
Press to return to standby mode.
13.1.2

Change the Date Format on your Cordless Handset

The date can be displayed either as Month/Day or Day/Month. The default setting is "DD/MM".
From the home screen, press
Press to "CLOCK&ALARM" and then
Press to "SET FORMAT" and then press
Press to "DATE FORMAT" and then press
>The current setting is displayed.
to select "DD/MM" or "MM/DD" and then press
Press
>A confirmation tone is played.
Press to return to standby mode.
13.2

Alarm Settings on your Cordless Handset

An alarm can be set on a handset, to sound at a set time only once or repeated each day.
When an alarm is set, the alarm icon is shown on the handset display.
When the alarm time is reached, the handset will flash "-ALARM-" on the display and sound an alarm
for 1 minute, at the same volume setting as the handset ringer. If the ringer is off, it will ring at volume
setting 1. When the alarm rings, you can press any key on the handset to stop the ringing, even if the
keylock is activated.
From the home screen, press
Press to "CLOCK&ALARM" and then press
Press to "ALARM" and then press
Press to an alarm option.
>"OFF": Turn alarm off
>"ON ONCE": The alarm sounds once at the set time.
>"ON DAILY": The alarm sounds daily at the set time.
Press to select the option.
If "ON ONCE" or "ON DAILY" is selected, enter the desired hour and minute.
>Press to select "AM" or "PM" if the time is in 12-hour format.
Press to confirm the alarm setting.
to confirm. The default time format is "24 HOURS".
to delete the last digit entered.
.
to select.
to select.
.
to select.
to select.
to select.
.
to select.
to select.
to select AM or PM.
to confirm.
to confirm.