Using Your Corded Base; Set Date & Time Using The Corded Base; Direct Dialling; Adjust Earpiece Or Speaker Volume - AEG Solo Combo 15 User Manual

12
>If there are more than 2 registered cordless handsets, the handset numbers which are available for
intercom will be displayed.
>Press the handset number you wish to call, press 0 to call the corded base, or press
all handsets.
Note:
If there is no answer from the called handset or corded base, or you wish to cancel the intercom call
before it is answered, press
Press on the called handset or pick up the corded handset from the corded base to answer the
internal call, where both internal callers can talk.
Press on the originating handset to transfer the external call to the called handset or corded base.
>The external call is transferred.
9

USING YOUR CORDED BASE

9.1 Set Date & Time using the Corded Base
If you subscribe to Caller Display, the time and date settings should be updated automatically from
the network when you receive a call. The time and date can also be set from a cordless handset.
Using the cordless base, you can set the date in DD/MM format and the time in 24-hours format.
In standby mode, press and hold
> - -:- - - - D / - - M is displayed.
Enter the current time, followed by the date. If you make a mistake, press
entered.
Press to confirm the date and time settings.
>A confirmation tone is played and the corded base returns to standby mode.
9.2 Make a call
9.2.1 Pre-dialling
In standby mode, enter the phone number (maximum 24 digits).
If you make a mistake, press
Pick up the corded handset from the base unit or press
When you complete the call, return the handset to the corded base unit or press .
9.2.2

Direct dialling

Pick up the corded handset from the base unit or press .
Listen for the dial tone and then enter the phone number.
When you complete the call, return the handset to the corded base unit or press .
9.3

Adjust Earpiece or Speaker Volume

There are 5 volume levels.
During a call, press + or - to select from L1 to L5.
>The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
to return to the external call.
to enter date & time settings.
to delete the last digit entered.
to delete the last digit
to dial the number.
to call