6
Inspect the position of the battery cover with the main
10.
housing. If the door is misaligned, remove battery
and black rubber pad and re-install.
Battery Door Properly
Aligned
Secure the battery cover with the Torx screw using a
11.
T8 Torx drive. Torque the screw to 3.3 ±0.2 Kgf-cm
(2.8 ±0.17 in-lb).
After installing a new battery, wait approximately one
12.
minute before inserting the mobile computer into a
cradle.
Charging the Battery
Before using the mobile computer, charge the battery.
Ensure the Charging cradle, p/n PSS-3CR01-00R or
1.
PSS-3CR01-NLR, is connected to the appropriate
power source. Refer to the MC17 Product Reference
Guide for detailed information.
Insert the mobile computer into the cradle.
2.
MC17/MC17A/MC17T Mobile Computer
Red Charging LED
Location