Rmon Trap Message; Fallingalarm Trap - Zte ZXR10 Handling Manual

Syntax
Information
Description
Triggering Criteria
Recommended
Operations
Binding variables
Information
Description
Triggering Criteria
Recommended
Operations
Binding variables
OID: 1.3.6.1.4.1.3902.3.4.7.1.8
Alarm description message
OID: 1.3.6.1.4.1.3902.3.4.7.1.9

RMON TRAP Message

risingAlarm Trap
The trap is sent when the monitored variable on RMON alarm table
exceeds the set upper alarm limit.
1. The monitored alarm variable value exceeds the set upper
alarm limit.
2. The trap sending is defined in the corresponding rising event
control item in the alarm control item.
3. The relevant configuration for SNMP sending trap is correct.
Please take the corresponding measure according to the influence
of the monitored variable changes on the system.
alarmIndex (alarm control table item index No.)
OID: 1.3.6.1.2.1.16.3.1.1.1
alarmVariable (monitored alarm variable)
OID: 1.3.6.1.2.1.16.3.1.1.3
alarmSampleType (monitored variable value sampling type: abso-
lute value type, difference type)
OID: 1.3.6.1.2.1.16.3.1.1.4
alarmValue (monitored variable value)
OID: 1.3.6.1.2.1.16.3.1.1.5
alarmRisingThreshold (set upper threshold of monitored variable)
OID: 1.3.6.1.2.1.16.3.1.1.7

fallingAlarm Trap

The trap is sent when the monitored variable in RMON alarm table
is lower than the set lower alarm limit.
1. The monitored alarm variable is lower than set lower alarm
limit.
2. The trap sending is defined in the corresponding falling event
control item in the alarm control item.
3. The relevant configuration for SNMP sending trap is correct.
Please take the corresponding measure according to the influence
of the monitored variable changes on the system.
alarmIndex (alarm control table item index No.)
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 TRAP Messages
261