HP ProCurve 2910al Series Installation And Getting Started Manual page 110

passwords, deleting ... 1-10
physical specifications, switch ... A-1
Ping test ... 4-10
pin-outs
twisted-pair cables ... C-6
PoE LEDs ... 1-7
PoE+ ... 1-3
port configuration
checking when troubleshooting ... 4-3
Port LED View
indicator LEDs ... 1-8
select button ... 1-8
selecting the display ... 1-8
port LEDs
description ... 1-7, 2-20
Link ... 1-7, 1-11
normal operation ... 2-7
ports
10/100Base-TX, location on switch ... 1-4–1-5
connecting to ... 2-25
console ... 2-21
HP Auto-MDIX feature ... C-6
network connections ... 2-25
power connector ... 1-13
power cords ... 2-2
Power LED ... 1-6, 2-20
behavior during self test ... 2-7
behaviors ... 1-6, 2-20
location on switch ... 1-4
power source
connecting the switch to ... 2-18
precautions
mounting the switch ... 2-3
power requirements ... 2-3
preparing the installation site ... 2-5
pre-standard PoE devices ... 1-3
Proactive Network tools
diagnostics with ... 4-8
R
rack
mounting precautions ... 2-3
mounting the switch in ... 2-11
rack mounting ... 2-3, 2-11
rail kit ... 2-1, 2-3
recycle statements ... E-1
regulatory statements ... D-8
4 – Index
Reset button
description ... 1-10
location on switch ... 1-4, 1-10
restoring factory default configuration ... 4-11
resetting the switch
factory default reset ... 4-11
location of Reset button ... 1-10
troubleshooting procedure ... 4-9
RPS/EPS connectivity ... 2-21
RPS/EPS LEDs ... 2-19
S
safety and regulatory statements ... D-1
safety specifications ... A-2
selecting the Port LED View display ... 1-8
self test
Fault LED behavior ... 2-7
LED behavior during ... 2-7
Power LED behavior ... 2-7
Self Test LED ... 1-7
behavior during factory default reset ... 4-11
serial cable
for direct console connection ... 2-23
SFP+ ... 1-2
slots for mini-GBICs
location on switch ... 1-4
Spd LEDs ... 1-7
specifications
cabling ... C-1
distance ... C-3
electrical ... A-1
environmental ... A-1, B-1
physical ... A-1
safety ... A-2
straight-through cable
pin-out ... C-7, C-9
subnet mask
configuring ... 3-3
summary
of switch installation ... 2-4