Back Of The Switch; Al Module Slots - HP ProCurve 2910al Series Installation And Getting Started Manual

Introducing the Switch

Back of the Switch

Back of the Switch
Serial No. SG12345678
System MAC Address
00-01-E7-12-34-56
Slot
A
Figure 1-7. HP ProCurve 2910al-48G Switch
Serial No. SG12345678
System MAC Address
00-01-E7-12-34-56
Slot
A
Figure 1-8. HP ProCurve 2910al-24G-PoE+ Switch

al Module Slots

C a u t i o n
It is required for the switch to be powered down before inserting or extracting
the Expansion Module.
These switches support three al modules. The al modules provide different
types of connectivity options for the switch.
■
■
■
1-12
al module slots
Auxiliary Port and LED
al module slot
The J9149A – provides two 10-GbE CX4 fixed copper ports
The J9008A – provides two 10-GbE SFP+ slots that support a number of
different transceivers. For supported transceivers see
1-2.
The J9165A – these modules have 1 fixed short-range CX4 port (up to 3
meters), and comes in a kit of 2 modules with one 0.5 meter cable.
Primarily used to interconnect two switches at 10-GbE speed.
CAUTION: MULTIPLE POWER SOURCES
Disconnect AC power cord and RPS cable,
to completely remove power from the unit.
12V System Power (RPS) Input
Slot
B
Auxiliary Port
RPS Input Port
EPS Input Port
CAUTION: MULTIPLE POWER SOURCES
Disconnect AC power cord, and EPS and RPS
cables, to completely remove power from the unit.
+
12V System Power (RPS) Input 50V PoE (EPS) Input
PoE
Slot
B
Connect ProCurve 620 EPS only
RPS Input Port
Line: 50/60 Hz.
100-127 V~ 10 A
200-240 V~ 5 A
AC power connector
Line: 50/60 Hz.
100-127 V~ 10 A
200-240 V~ 5 A
AC power connector
Table 1-1 on page