Installing or Removing the Optical Media Converter
You can connect an Optical Media Converter (OMC) to the fixed ports only.
Use only HP ProCurve OMCs.
Installing the OMC:
1.
Connect the OMC to the fixed port.
2.
Push it until it clicks.
Figure 2-12. Installing an OMC
The OMC has a single bi-color LED to indicate power and link. The LED is
orange when the OMC has power but no link. The LED turns green when a
link is established.
Removing the OMC:
1.
Disconnect the network cable from the OMC before removing it from the
module.
2.
Grasp the extractor handle and pull straight out.
Installing the Switch
Installation Procedures
Extractor handle
2-15