Features - HP ProCurve 2910al Series Installation And Getting Started Manual

Features

Module Status
LEDs
Link and Mode LEDs
(one pair per port)
Figure 2.
The al Modules have the following features:
■ Connectivity ports.
■ LEDs that provide information for each port on the link and mode status.
LED that provides information on module status.
■
■ "hot swap transceiver" support—you can add, replace, or change the type
of any of the transceivers that you use in the SFP+ module ports, without
having to first remove the module, and without having to shut down the
switch.
Standards adherence:
■ IEEE 802.3ak CX4
■ IEEE 802.3ae XAUI
HP ProCurve 10-GbE CX4 al Module
Copper CX4 port connections
Front of the al 10-GbE CX4 Module
Introducing the Switch
Features
Retaining screw
1-15