M1 Navigator Keypad Users Manual
Output Control
The Output Control screen will be displayed when Output Control is selected from the
Automation window.
8 output buttons are displayed on the screen at once with each output button displaying
the output number and output name.
The scroll bar at the right side of the screen can be used to scroll to other outputs. The
Previous and Next buttons can also be used to display the previous or next group of 8
outputs.
Pressing an output button will toggle the output state. The output button will be
highlighted if the output is on.
Outputs not connected to the system, or programmed by the installer not to be
programmed to be controlled by the Navigator keypad will be greyed out, these outputs
will also not display a name
Activation outputs from single View
If an advanced user wishes to activate internally activated outputs, these can still be
activated by using the "Single View button". Advanced users who understand the
consequences from activating "Internally activated outputs may do so by pressing the
Single View button to display the Single View output screen where all outputs can be
selected and then activated.
16
17