FABIA 2000
Inspection and Maintenance
If ATF is added, use ATF with spare part number -G 052
990 A2-.
–
The gasket ring -arrow- for the ATF screw plug must
always be replaced.
Inspecting ATF level
Test conditions
•
Gearbox not in emergency running mode, ATF tem-
perature not above 30°C.
•
Vehicle on level ground
•
Selector lever in „P"
–
Attach the reservoir of the ATF filling system, e.g.
-V.A.G 1924- to the vehicle.
–
Connect vehicle system tester -V.A.G 1552- with di-
agnostic cable -V.A.G 1551/3- ⇒ Chap. 02-6.
–
Select address word 02 „gearbox electronics" and
move forward until „select function XX" appears in the
display.
–
Start engine.
–
Raise vehicle.
–
Position the catch pan under the gearbox.
Readout on display:
–
Enter function
for „Read measured value block"
0 8
and confirm the entry with the key
–
Enter function for „display group number
0 0 2
002" and confirm the entry with the key
Readout on display:
The third display field indicates the ATF temperature.
Note
The ATF temperature must not exceed 30 C at the start
of the test.
Edition 07.03
S00.5301.12.20
Vehicle system test
Select function XX
Reading measured value block
.
Q
Enter display group number XXX
.
Q
Reading measured value block
0%
Gearbox
V.A.G 1924
V.A.G 1552
4%
30 C
02
N38-0037
S37-0078
HELP
2
->
12.9 V
02-4
3
page