02
Every 240 000 km (QG0)
Includes: Inspection every 120 000 km and additional operations stated in the table below
Work involved
–
Replace tensioning pulley (PD diesel engine as of 08.03)
Inspection Service (QG1, QG2)
♦
Every 2 years - in addition change brake fluid
♦
Every 4 years - replace contents set for tyre repair
♦
Every 90 000 km - replace the guide pulley and the tensioning pulley (PD diesel engine up to 07.03)
♦
Every 120 000 km - replace the timing belt and the guide pulley (038 109 244 H) (diesel engines as of 05.01 to
04.02 except the PD engine)
♦
Every 120 000 km - Replace the timing belt (PD Diesel engine as of 08.03)
♦
Every 150 000 km - replace the timing belt (diesel engines as of 05.02 and with the guide pulleyr 038 109 244
M) - except on the TDI PD engine
♦
Every 240 000 km - Replace the tensioning pulley (PD Diesel engine as of 08.03)
♦
Exhaust-emission analysis (EEA). Expiry date - see EEA tag on the vehicle identification plate (only valid for
some countries)
♦
At each inspection - check the 'use by date' of the first aid kit
♦
Recommendation: Replace windscreen wiper blades every 2 years
Note
♦
Vehicles with WIV (QG1) must be filled with oils which conform to the VW standard 503 00 (petrol engines) VW
506 00 (SDI, TDI diesel engines) or VW 506 01 (TDI PD diesel engines), possibility of damage when using other
oils.
♦
Vehicles with WIV which have been filled with oils which do not conform to the VW standard 503 00 or VW 506 00
or VW 506 01, must be coded in the WIV with a fixed oil change limitation (QG2) ⇒ Chapter 02-6.
Work involved
–
Interrogate fault memory of all systems, if necessary erase
–
Visual inspection: Engine and components in the engine compartment for leaks and dam-
age
–
Change the engine oil, replace the oil filter
–
Conduct a visual inspection of the airbag units for external damage
–
Reset service interval display
–
Inspecting brake system for leaks and damage
–
Check the thickness of the brake pads on all wheels
–
Check gearbox, final drive, drive shafts and joint boots for leaks and damage
–
Axle joints: Inspect boots for leaks and damage
–
Track rod ends: Inspect play and correct attachment of boots
02-2
8
page
FABIA 2000
Inspection
Inspection and Maintenance
Chapter
02-3
Chapter
02-6
02-3
02-3
02-7
02-6
02-5
02-5
Edition 09.04
S00.5301.14.20