Adjusting Salt Consumption - Kenwood KID60S18 Installation Instructions Manual

adjusting salt consumption

Salt consumption must be adjusted to correspond to the water hardness level in your area. If you don't
know how hard the water in your home is, please ask the company that supplies water in your area.
It is recommended that adjustments should be made in accordance with the following chart.
water German
hardness hardness
level
1
2 6-11
3 12-17
4 18-22
5 23-31
6 32-50
1˚dh (German degree) = 0.18 mmol/l
1˚fh (French degree) = 0.1 mmol/l
1˚Clark (British degree) = 0.142 mmol/l
To adjust your dishwasher for the local water hardness, please follow these steps and refer to the
table above.
1. With the dishwasher switched off press and hold the P
button.
2. While holding the P button down press the Power button to
switch the dishwasher on.
3. Keep holding the P button down until you see SL in
the display. Then the display will show the current salt
setting. The factory setting is L3.
4. Press the P button to scroll through the levels. The level
will change with each press. See the table above for
details.
5. To save your setting switch the dishwasher off by
pressing the POWER button.
Kenwood Integrated Diswasher KID60S18 Manual.indd 23
French British
hardness hardness
dH dF dE
0-5 0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-55 29-39
56-90 40-63
Switch on while
holding button P down
hardness level indicator
Press and hold
Switch on while
holding button P down
KID60S18
23
07/12/2018 12:17