Calendar Search; Jump To First Saved Data; Jump To Last Saved Data; Event Search - Honeywell H.264 HRDP User Manual

Operation

Calendar Search

Jump to First Saved Data

Jump to Last Saved Data

Event Search

Daylight Savings Search

______________________________________________________________________________________________
66
Select a specific date and time to search for recordings:
1. Press SEARCH on the front panel or remote control and then
CALENDAR SEARCH, or
Click MENU on the Tool menu, select SEARCH and then select
CALENDAR SEARCH.
2. Select a date on the calendar.
3. Click the appropriate set of channels and then move the white vertical
line indicator to select a specific time for searching.
Tip Dates with an asterisk contain recorded video data.
Go to the first frame of the recorded data. This is the oldest image recorded.
Go to the last frame of the recorded image. This is the latest image
recorded.
Use the Event Search to find particular events.
The 11 most recent events display on the first Event Search/Log page. Click
the arrows at the top of the screen to view the remianing entries for each
date. You can filter the log results by SENSOR, MOTION, VIDEO LOSS, and
DISK FULL/
Write the Event log to a CD or connected USB device in text file format:
1. Insert a CD/DVD or USB device in the DVR
2. Click SCAN, and then click EXPORT to copy the log information to the
CD/DVD or USB device.
3. The Event Log is saved in a dated folder as a system.log file.
Daylight Savings Search is used to find recorded data after switching the
time at the end of Daylight Savings Period. The System will record data with
the same time stamp for two hours when they are repeated. If any
overlapped time data exists the system will display the times on this page.