Disk Configuration; Format - Honeywell H.264 HRDP User Manual

Disk Configuration

Format

______________________________________________________________________________________________
Document 800-06801 Rev B
06/10
Shows installed Hard Disk Drives and the status of other attached storage
devices.
To format a Hard Drive use the arrow keys to select the appropriate device
and press ENTER. Select OK to confirm formatting and press ENTER.
To format a USB device use the arrow keys to select FORMAT and press
ENTER. Select the USB target and select FAT32. Press OK to format.
Tip Refer to the list of Approved USB Flash Drives in the Introduction
chapter.
To refresh the list of connected USB devices select RESET and press
ENTER.
Caution All USB devices must be formatted as FAT32 before using with the
DVR.
Note Upon formatting a drive, all video and other data stored on that
drive will be permanently erased and cannot be recovered.
Performance Series DVR User Guide
33