Wacom Cintiq 24HD touch User Manual page 63

Tag5 V.R
ESOLUTION
(cont.)
E
XPANSION
S B
IDE ORDER
Tag6 DVI S
ELECTION
EDID E
XTENSION
(digital input only)
V D
IDEO ETECT
O T
FF IMER
Contents
Adjusts the vertical size by increasing or decreasing the setting. Press the right
button to expand the height of the image on the screen. Press the left button to
narrow the height of the image on the screen.
Sets the zoom method.
F : The image is expanded to full screen regardless of the resolution.
ULL
A : The image is expanded without changing the aspect ratio.
SPECT
O : The image is not expanded.
FF
C : When C
USTOM
possible to adjust the H. Z
C Adjusts the side black bars color between black and white.
OLOR
Allows you to choose an appropriate mode for the video connection in use:
D , A
IGITAL NALOG
A communication setting with input device, containing signal timing.
N : When a PC or other computer equipment is connected, select
ORMAL
"Normal".
Enhanced: Alternate setting for non-PC devices such as DVD players or game
consoles.
Note: Interlaced signals (480i, 576i, 1080i) are not supported. If you have any
problems, see Troubleshooting. When EDID E
changed, the connected equipment has to be restarted.
Selects the method of video detection when more than one computer is
connected.
F : When current video input signal is not present, then the display searches
IRST
for a video signal from the other video input port. If the video signal is present
in the other port, then the display switches the video source input port to the
new found video source automatically. The display will not look for other video
signals while the current video source is present.
L : When the display is showing a signal from the current source and a new
AST
secondary source is supplied to the display, then the display will automatically
switch to the new video source. When current video input signal is not present,
then the display searches for a video signal from the other video input port.
If the video signal is present in the other port, then the display switches the
video source input port to the new found video source automatically.
N : The display will not search the other video input port unless the display
ONE
is turned on.
Display will automatically turn off after the preset time period from power on
with the O /O
N
right button to adjust. Before powering off, a message will appear on the
screen asking if you want to delay the turn off time by 60 minutes. Press any
OSD button to delay the turn off time.
Contents
Index
is selected as the expansion mode, it becomes
USTOM
., V. Z
OOM OOM
, or A .
UTO
function. When you select "On", press S
FF
Index
, and Z P .
OOM OS
has been
XTENSION
and the left or
ELECT
63
63