Wacom Cintiq 24HD touch User Manual page 62

Tag4 A-NTAA SW
(cont.) (analog input only)
A C
UTO ONTRAST
(analog input only)
C
ONTRAST
A B
UTO LACK
(analog input only)
B
LACK LEVEL
(analog input only)
Tag5 H.P
OSITION
V.P
OSITION
H.S
IZE
(analog input only)
F
INE
(analog input only)
A F
UTO INE
(analog input only)
H.R
ESOLUTION
Contents
The Advanced No Touch Auto Adjust function is able to recognize new signals
even when neither the resolution nor the refresh rate has changed. If several
PCs are connected to the monitor, and each transmit very similar (or even the
same) signals in terms of resolution and refresh rates, the monitor recognizes
there is a new signal and automatically optimizes the picture without the need
for any action on your part.
O : A-NTAA is disabled.
FF
O : If a change in signal is detected, A-NTAA will adjust the monitor to the
N
optimal settings for the new signal. If no change in the signal is detected then
A-NTAA does not activate. The screen will be blank while the monitor
optimizes the signal.
O : Functions the same as O
PTION
when the monitor makes adjustments for changes in signal, allowing the
monitor to display the new signal faster. When using an external switching
device to connect 2 or more PCs to the monitor, using the O
settings is suitable.
Adjusts the image displayed for non-standard video inputs. Press S
adjust. Any adjustment requires the image to have white portions.
Adjusts the image brightness and contrast in relation to the background.
L Automatically adjusts the black level. Any adjustment requires the image to
EVEL
have black portions. Press S
Adjusts the RGB black level by input signal level.
Controls Horizontal Image Position within the display area of the LCD.
Controls Vertical Image Position within the display area of the LCD.
Adjusts the horizontal size of the screen.
If the A A
UTO
further tuning can be performed using the H.S
For this a moiré test pattern may be used. This function may alter the width of
the picture. Use left/Right Menu to center the image on the screen. The image
should be homogeneous.
Improve focus, clarity and image stability by increasing or decreasing this
setting. If the A
satisfactory picture setting, a fine tuning can be performed using the F
function. For this a moiré test pattern may be used. The image should be
homogeneous.
This function automatically and periodically adjusts the F
in signal condition. This function adjusts approximately every 33 minutes.
Adjusts the horizontal size by increasing or decreasing the setting. Press the
right button to expand the width of the image on the screen. Press the left
button to narrow the width of the image on the screen.
Contents
Index
, except that the screen does not go blank
N
to activate A
ELECT
function does not give you a satisfactory picture setting, a
DJUST
A function and the H.S
UTO DJUST
Index
or O
N PTION
ELECT
A .
UTO DJUST
(V.S ) function (dot clock).
IZE IZE
function do not give you a
IZE
setting for change
INE
62
to
INE
62